Syntace Vector Lowrider Carbon MTB Handlebars, 25.4mm Extremely strong, with a great ride and only weighing 183 grams! Exactly what you have come to expect from a Syntace handlebar.
The Finish From the first look you notice something different. We incorporate a Titanium-mesh in the design of the Lowrider Carbon bar. This Ti-mesh wrap protects the clamp area as well as bar end locations from wear, which may harm the carbon.
Carbon Handlebars Can be very light, but in relation to crash security very treacherous as well. In order to achieve the high safety, which is typically Syntace. We have combined new fiber types and more complex arrangement of the fiber layers with a load-dependent diameter. Resulting in a stronger bar.
Faster And More Comfortable The Syntace carbon handlebar isn't stiffer than others, but it also absorbs smaller impacts and vibrations better thanks to its outstanding dampening characteristics. We Didn't Take The Easy Way Out The Syntace Lowrider Carbon is suitable for all "normal" stems as well as the Syntace VRO system. It absorbs smaller impacts and vibrations due to its dampening effects providing very precise steering at the same time. The Syntace Lowrider Carbon is available with a 12° sweep, which is more ergonomic and puts the rider in a more comfortable position. Production is more difficult but the 12° sweep results in a cockpit that lets the rider get more miles in the saddle. Compatible With Syntace VRO The Syntace Lowrider Carbon is compatible with the ingenious Syntace VRO system (patented). Together with Syntace VRO 1 1/8" stem and titanium screws it's like a dream...visually and on the trail! Light, strong and stiff! VR-3 approved according to VR-3 downhill standard DH 2002.4, the worldâs toughest test standard for handlebars and stems. Suitable For 4 Screw Stems Syntace handlebars are with a special internal reinforcement to give them uncompromising compatibility with four-bolt stems. You'll be able to recognize these "four-bolt compatible bars by the following symbol: DATA Weight: 183g Width: 650mm Rise: 13mm Clamp: 25.4mm Angle: 12 deg Color: Carbon Note: If using bar ends, do not shorten the bar. If using bar ends, Syntace bar plugs CRB are required (not included, see âAccessories for Bars & Stems).
Without bar ends the bar can be cut to any length. Tip: The Syntace Vector Lowrider Carbon can be used with the VRO system as well as with conventional MTB stems. If used with conventional stems, only stems with front clamping through a plate are allowed. The older, one-screw clamping systems with thread-through can not be used (the VRO system is o.k.). The bar can also not be used with the V-2 system. Please contact us for other solutions. |
