Syntace Vector Lowrider Carbon MTB Handlebars, 31.8mm Extremely strong, with a great ride and only weighing 189 grams! The carbon riser bar that lasts, as you would expect from a Syntace bar - now with the 31.8 clamp standard. The advantages of carbon can only be used to their full extend if adequate manufacturing knowledge is on hand. Carbon bars can be very light-weight, but also very malicious in terms of safety. To achieve the high safety, typical for Syntace, we have used a new type of fibre and a complex arrangement of the individual fibre layers combined with a loading optimized cross section. Especially critical areas were additionally reinforced.
Faster and more comfortable The Syntace carbon handlebar isn't only stronger than others, but it also absorbs smaller impacts and vibrations better thanks to its outstanding dampening characteristics - as well as offering an incredible steering precision.
The extreme protection can be seen with the naked eye. The central in-molded titanium lattice protects the handlebar from the crushing loads of the stem clamp and protects the precious carbon surface against Strength reducing wear and annoying slipping of the bar.
We didn't take the easy way out The Syntace Vector 31.8 Carbon is not available in the easily manufactured 6° sweep, but only in the 12° sweep which provides a clearly superior and ergonomically comfortable position.
VR-3 approved according to VR-3 downhill standard DH 2002.4, the worldâs toughest test standard for handlebars and stems.
Suitable For 4 Screw Stems Syntace handlebars are with a special internal reinforcement to give them uncompromising compatibility with four-bolt stems. You'll be able to recognize these "four-bolt compatible bars by the following symbol:
DATA Weight: 189g Width: 680mm Rise: 10mm Clamp: 31.8mm Angle: 12 deg Color: Carbon Note: This bar is not suitable for use with barends or cutting. Tip: The Syntace Vector Lowrider Carbon can be used with the VRO system as well as with conventional MTB stems. If used with conventional stems, only stems with front clamping through a plate are allowed. The older, one-screw clamping systems with thread-through can not be used (the VRO system is o.k.). The bar can also not be used with the V-2 system. Please contact us for other solutions. |
